100 lb. ft. MagneBrake (100MB*90B20)
SEE TABS BELOW FOR SPECS & RESOURCES
Available Cooling Types.
- Model 100MB90B20 convection cooled.
- Model 100MBA90B20 forced air cooled.
- Model 100MBW90B20 water cooled.
Optimum Performance.
- Low cycle inertia.
- Faster stops and response.
- Excellent torque testing.
- Extra heat dissipation.
- Extra holding capacity, faster stops.
- Improved brake reliability.
- Allows use of smaller more efficient motor.
Large Power Handling Capacity.
- Largest slipway capacity available for ratings.
- Ideal for unwinds and stands.
- Automatic tension control for heavier materials. Extra large roll braking capacity.
- Controlled and emergency stops for long conveyors.
- Economic industrial cycling control.
Large Size.
- Heavier brake allow extra options
- Simple base mounting.
- More compact, economical installations.
Available Cooling Types.
- Model 100MB90B20 convection cooled.
- Model 100MBA90B20 forced air cooled.
- Model 100MBW90B20 water cooled.
Optimum Performance.
- Low cycle inertia.
- Faster stops and response.
- Excellent torque testing.
- Extra heat dissipation.
- Extra holding capacity, faster stops.
- Improved brake reliability.
- Allows use of smaller more efficient motor.
Large Power Handling Capacity.
- Largest slipway capacity available for ratings.
- Ideal for unwinds and stands.
- Automatic tension control for heavier materials. Extra large roll braking capacity.
- Controlled and emergency stops for long conveyors.
- Economic industrial cycling control.
Large Size.
- Heavier brake allow extra options
- Simple base mounting.
- More compact, economical installations.
100MB(W)90B20 / 100MBA90B20
Data sheet
- Model
- 100MB90B20 / 100MBA90B20 / 100MBW90B20
- Rated Torque (lb.-ft.)
- 100
- Mounting
- Base
- Type Of Cooling
- Convection
- Heat Dissipation at 1800 RPM (Watts) (5)
- 1100 (CV) / 1700 (FA) / 4500 (W)
- Max Oper. Speed (RPM) (6)
- 3600
- Non-Excited Drag Torque (lb.-ft.)
- 1.0
- Inertia (WK (2)) Rotating Member (lb.-ft. (2)) x 10(-2) - OUTER
- 68.0
- Inertia (WK (2)) Rotating Member (lb.-ft. (2)) x 10(-2) - INNER
- -
- Wgt. Approx (lbs.)
- 98 (CV) / 110 (FA) / 98 (W)
- Coil Data (Input 90VDC) - CURRENT AMPERES (4)
- 1.0
- Coil Data (Input 90VDC) - RESISTANCE OHMS @ 20 C
- 68
- Note (1)
- Utilize NEMA 56C Motor
- Note (2)
- Coils for other voltage wound to order
- Note (3)
- Data given represents the average, continuous dissipation capacity of units operating under slip conditions
- Note (4)
- Applications requiring operation below 30 RPM should be referred to factory for evaluation
SEE TABS BELOW FOR SPECS & RESOURCES
Available Cooling Types.
- Model 100MB90B20 convection cooled.
- Model 100MBA90B20 forced air cooled.
- Model 100MBW90B20 water cooled.
Optimum Performance.
- Low cycle inertia.
- Faster stops and response.
- Excellent torque testing.
- Extra heat dissipation.
- Extra holding capacity, faster stops.
- Improved brake reliability.
- Allows use of smaller more efficient motor.
Large Power Handling Capacity.
- Largest slipway capacity available for ratings.
- Ideal for unwinds and stands.
- Automatic tension control for heavier materials. Extra large roll braking capacity.
- Controlled and emergency stops for long conveyors.
- Economic industrial cycling control.
Large Size.
- Heavier brake allow extra options
- Simple base mounting.
- More compact, economical installations.