50 lb. ft. MagneClutch (50MC*90F2*)
SEE TABS BELOW FOR SPECS & RESOURCES
Available Cooling Types.
- Model 50MC90F20 and F22 convection cooled.
- Model 50MCA90F20 forced air cooled.
Variable Speed.
- 90 Volt. Available in other voltages to order.
- Conveyor drives, traction drives, hoists, centrifuges, material handling.
- 1 to 15 hp.
- 0 to full speed.
- Quiet, unlimited life.
Compact.
- Eliminates alignment problems.
- Eliminates space wasting coupling.
- Unobtrusive machine addition.
- Blends operationally with equipment.
Maximum Effectiveness.
- Fits NEMA Motors.
- Mounts directly on NEMA 213T, 215T frame motors.
- Adapter allows for mount on NEMA 182T, 184T frame motors.
- Mounts directly to motor.
- Simple installation.
Available Cooling Types.
- Model 50MC90F20 and F22 convection cooled.
- Model 50MCA90F20 forced air cooled.
Variable Speed.
- 90 Volt. Available in other voltages to order.
- Conveyor drives, traction drives, hoists, centrifuges, material handling.
- 1 to 15 hp.
- 0 to full speed.
- Quiet, unlimited life.
Compact.
- Eliminates alignment problems.
- Eliminates space wasting coupling.
- Unobtrusive machine addition.
- Blends operationally with equipment.
Maximum Effectiveness.
- Fits NEMA Motors.
- Mounts directly on NEMA 213T, 215T frame motors.
- Adapter allows for mount on NEMA 182T, 184T frame motors.
- Mounts directly to motor.
- Simple installation.
Model 50MC90F20(22) / 50MCA90F20
Data sheet
- Model
- 50MC90F20 and F22 / 50MCA90F20
- Rated Torque (lb.-ft.)
- 50
- Mounting
- Flange (8)
- Type Of Cooling
- Convection (CV) / Forced Air (FA)
- Heat Dissipation at 1800 RPM (Watts) (5)
- 1050 (CA) / 1350 (FA)
- Max Oper. Speed (RPM) (6)
- 3600
- Non-Excited Drag Torque (lb.-ft.)
- 0.40
- Inertia (WK (2)) Rotating Member (lb.-ft. (2)) x 10(-2) - OUTER
- 24.0
- Inertia (WK (2)) Rotating Member (lb.-ft. (2)) x 10(-2) - INNER
- 17.0 (CV) / 18 (FA)
- Wgt. Approx (lbs.)
- 61 (CA) / 67 (FA)
- Coil Data (Input 90VDC) - CURRENT AMPERES (4)
- 0.53
- Coil Data (Input 90VDC) - RESISTANCE OHMS @ 20 C
- 127
- Note (2)
- Utilize NEMA 182T or 184T Frame motors with A-50 Adapter
- Note (4)
- Coils for other voltages wound to order
- Note (5)
- The data given represents the average, continuous dissipation capacity of units operating under slip conditions
- Note (6)
- Applications requiring continuous operation below 30 RPM should be referred to factory for evaluation
SEE TABS BELOW FOR SPECS & RESOURCES
Available Cooling Types.
- Model 50MC90F20 and F22 convection cooled.
- Model 50MCA90F20 forced air cooled.
Variable Speed.
- 90 Volt. Available in other voltages to order.
- Conveyor drives, traction drives, hoists, centrifuges, material handling.
- 1 to 15 hp.
- 0 to full speed.
- Quiet, unlimited life.
Compact.
- Eliminates alignment problems.
- Eliminates space wasting coupling.
- Unobtrusive machine addition.
- Blends operationally with equipment.
Maximum Effectiveness.
- Fits NEMA Motors.
- Mounts directly on NEMA 213T, 215T frame motors.
- Adapter allows for mount on NEMA 182T, 184T frame motors.
- Mounts directly to motor.
- Simple installation.