50 lb. ft. MagneClutch (50MC*90B20)
SEE TABS BELOW FOR SPECS & RESOURCES
Available Cooling Types.
- Model 50MC90B20 convection cooled.
- Model 50MCA90B20 forced air cooled.
- Model 50MCW90B20 water cooled.
Small Weight & Size.
- Simpler handling & mounting.
- Flexible installations.
- Adaptability.
Extra Power Handling Capacity.
- 90 Volt. Available in other voltages to order.
- High slip loads.
- High inertia acceleration.
- Economical industrial cycling control.
- Material conveyor soft-start, stop.
- Handle over 25 hp.
Effective Performance & Design.
- Low system inertia.
- Faster cycles & response.
- Excellento for torque testing.
- Large slip watt capacity.
- Precise end shield diameter for saddle-mount & other use.
- Removeable feet.
- Broader application range.
Available Cooling Types.
- Model 50MC90B20 convection cooled.
- Model 50MCA90B20 forced air cooled.
- Model 50MCW90B20 water cooled.
Small Weight & Size.
- Simpler handling & mounting.
- Flexible installations.
- Adaptability.
Extra Power Handling Capacity.
- 90 Volt. Available in other voltages to order.
- High slip loads.
- High inertia acceleration.
- Economical industrial cycling control.
- Material conveyor soft-start, stop.
- Handle over 25 hp.
Effective Performance & Design.
- Low system inertia.
- Faster cycles & response.
- Excellento for torque testing.
- Large slip watt capacity.
- Precise end shield diameter for saddle-mount & other use.
- Removeable feet.
- Broader application range.
Model 50MC(W)90B20 / 50MCA90B20
Data sheet
- Model
- 50MC90B20 / 50MCA90B20 / 50MCW90B20
- Rated Torque (lb.-ft.)
- 50
- Mounting
- Base
- Type Of Cooling
- Convection (CV) / Forced Air (FA) / Water (W)
- Heat Dissipation at 1800 RPM (Watts) (5)
- 1050 (CA) / 1350 (FA) / 3000 (W)
- Max Oper. Speed (RPM) (6)
- 3600
- Non-Excited Drag Torque (lb.-ft.)
- 0.40
- Inertia (WK (2)) Rotating Member (lb.-ft. (2)) x 10(-2) - OUTER
- 24.0
- Inertia (WK (2)) Rotating Member (lb.-ft. (2)) x 10(-2) - INNER
- 18.0 (CA) / 18.0 (FA) / 17.0 (W)
- Wgt. Approx (lbs.)
- 57 (CA) / 67 (FA) / 57 (W)
- Coil Data (Input 90VDC) - CURRENT AMPERES (4)
- 0.53
- Coil Data (Input 90VDC) - RESISTANCE OHMS @ 20 C
- 127
- Note (4)
- Coils for other voltages wound to order
- Note (5)
- The data given represents the average, continuous dissipation capacity of units operating under slip conditions
- Note (6)
- Applications requiring continuous operation below 30 RPM should be referred to factory for evaluation
- Note (7)
- Water Cooled Utilize NEMA 254TC or 256TC frame motors
- Note (8)
- Water Cooled Utilize NEMA 140TC frame motors
SEE TABS BELOW FOR SPECS & RESOURCES
Available Cooling Types.
- Model 50MC90B20 convection cooled.
- Model 50MCA90B20 forced air cooled.
- Model 50MCW90B20 water cooled.
Small Weight & Size.
- Simpler handling & mounting.
- Flexible installations.
- Adaptability.
Extra Power Handling Capacity.
- 90 Volt. Available in other voltages to order.
- High slip loads.
- High inertia acceleration.
- Economical industrial cycling control.
- Material conveyor soft-start, stop.
- Handle over 25 hp.
Effective Performance & Design.
- Low system inertia.
- Faster cycles & response.
- Excellento for torque testing.
- Large slip watt capacity.
- Precise end shield diameter for saddle-mount & other use.
- Removeable feet.
- Broader application range.