5 lb. ft. MagneClutch (5MC90B)
SEE TABS BELOW FOR SPECS & RESOURCES
Multiple Options.
- 90 Volt. Available in other voltages to order.
- Choice of torque ratings.
- Water or forced air cooled.
Small Size & Weight.
- Size tailored to application.
- Simpler handling & mounting.
Efficient Configuration.
- Base-mount unit may be used as jack shaft.
- Received ready to use.
- Direct coupling to drive or load.
Flexibility.
- Use as brake or clutch in reeling applications.
- Wind-unwind tension control.
- Adapts to production fixtures.
- Soft acceleration control for delicate materials.
Multiple Options.
- 90 Volt. Available in other voltages to order.
- Choice of torque ratings.
- Water or forced air cooled.
Small Size & Weight.
- Size tailored to application.
- Simpler handling & mounting.
Efficient Configuration.
- Base-mount unit may be used as jack shaft.
- Received ready to use.
- Direct coupling to drive or load.
Flexibility.
- Use as brake or clutch in reeling applications.
- Wind-unwind tension control.
- Adapts to production fixtures.
- Soft acceleration control for delicate materials.
Model 5MC90B
Data sheet
- Model
- 5MC90B
- Rated Torque (lb.-ft.)
- 5
- Mounting
- Base
- Type Of Cooling
- Convection
- Heat Dissipation at 1800 RPM (Watts) (5)
- 136
- Max Oper. Speed (RPM) (6)
- 6000
- Non-Excited Drag Torque (lb.-ft.)
- 0.05
- Inertia (WK (2)) Rotating Member (lb.-ft. (2)) x 10(-2) - OUTER
- 0.75
- Inertia (WK (2)) Rotating Member (lb.-ft. (2)) x 10(-2) - INNER
- 0.91
- Wgt. Approx (lbs.)
- 15
- Coil Data (Input 90VDC) - CURRENT AMPERES (4)
- 0.21
- Coil Data (Input 90VDC) - RESISTANCE OHMS @ 20 C
- 306
- Note (4)
- Coils for other voltages wound to order
- Note (5)
- The data given represents the average, continuous dissipation capacity of units operating under slip conditions
- Note (6)
- Applications requiring continuous operation below 30 RPM should be referred to factory for evaluation
SEE TABS BELOW FOR SPECS & RESOURCES
Multiple Options.
- 90 Volt. Available in other voltages to order.
- Choice of torque ratings.
- Water or forced air cooled.
Small Size & Weight.
- Size tailored to application.
- Simpler handling & mounting.
Efficient Configuration.
- Base-mount unit may be used as jack shaft.
- Received ready to use.
- Direct coupling to drive or load.
Flexibility.
- Use as brake or clutch in reeling applications.
- Wind-unwind tension control.
- Adapts to production fixtures.
- Soft acceleration control for delicate materials.