10 lb. ft. MagneBrake (10MB*90B20)
SEE TABS BELOW FOR SPECS & RESOURCES
Available Cooling Types.
- Model 10MB90B20 convection cooled.
- Model 10MBA90B20 forced air cooled.
- Model 10MBW90B20 water cooled.
- 90 Volt. Available in other voltages to order.
Small Size & Weight.
- Simpler handling & mounting.
- Flexible installation.
Large Power Handling Capacity.
- Absorbs more slip.
- Low cost, high capability.
- Large roll braking capacity.
- Economical cycling control.
Base Mounting.
- Space savings.
- Better equipment adaptability.
- More compact economical installations.
- Precise mounting diameter for exact equipment matchup.
Fast Response.
- Rapid stopping.
- Precise control.
- Controlled stopping for long conveyors.
Available Cooling Types.
- Model 10MB90B20 convection cooled.
- Model 10MBA90B20 forced air cooled.
- Model 10MBW90B20 water cooled.
- 90 Volt. Available in other voltages to order.
Small Size & Weight.
- Simpler handling & mounting.
- Flexible installation.
Large Power Handling Capacity.
- Absorbs more slip.
- Low cost, high capability.
- Large roll braking capacity.
- Economical cycling control.
Base Mounting.
- Space savings.
- Better equipment adaptability.
- More compact economical installations.
- Precise mounting diameter for exact equipment matchup.
Fast Response.
- Rapid stopping.
- Precise control.
- Controlled stopping for long conveyors.
Model 10MB(W)90B20 / 10BMA90B20
Data sheet
- Model
- 10MB90B20 / 10BMA90B20 / 10MBW90B20
- Rated Torque (lb.-ft.)
- 10
- Mounting
- Base
- Type Of Cooling
- Convection (CV) / Forced Air (FA) / Water (W)
- Heat Dissipation at 1800 RPM (Watts) (5)
- 500 (CV) / 785 (FA) / 2500 (W)
- Max Oper. Speed (RPM) (6)
- 3600
- Non-Excited Drag Torque (lb.-ft.)
- 0.15
- Inertia (WK (2)) Rotating Member (lb.-ft. (2)) x 10(-2) - OUTER
- 4.0
- Inertia (WK (2)) Rotating Member (lb.-ft. (2)) x 10(-2) - INNER
- -
- Wgt. Approx (lbs.)
- 26 (CV) / 33 (FA) / 26 (W)
- Coil Data (Input 90VDC) - CURRENT AMPERES (4)
- 0.25
- Coil Data (Input 90VDC) - RESISTANCE OHMS @ 20 C
- 273
- Note (2)
- Coils for other voltage wound to order
- Note (3)
- Data given represents the average, continuous dissipation capacity of units operating under slip conditions
- Note (4)
- Applications requiring operation below 30 RPM should be referred to factory for evaluation